Xerox 3030 User Manual

XEROX 3030 ENGINEERING COPIER

PLAIN-PAPER PRODUCTIVITY

WHEN YOU NEED IT...

WHERE YOU NEED IT.

Point of need convenience

Compact and user friendly

Improve your productivity

•

The Xerox 3030 Engineering Copier

Roll-fed media loading is quick and easy. There's a manual

bypass for feeding cutsheet media. And our standard copy stacker

and optional document stacker enhance operator efficiency.

The Xerox 3030 Engineering Copier is a point-of-need plain-

paper copier that's compact, aesthetically pleasing and

environmentally friendly. The 3030 gives you walk-up

convenience, automatic operation and a clear, easy-to-use

graphic interface.

Remember, your productivity is directly related to the flow of

engineering information. With the 3030, drawing elements can

be updated via cut-and-tape editing methods to form new

concept drawings quickly, right in the drawing room. Drawings

can be restored to "like new" condition, with the added storage

and handling benefits of plain-paper media. The 3030 gives you

added control of copy quality in terms of contrast and density.

With a 3030 at your point of need, you can make sure the vital

flow of engineering information won't bog down.

Copy from original drawings, bluelines, sepias, CAD plots and

cut-and-tape composites onto bond, vellum or film - up to 15

copies from a single feed. Select automatic synchrocut or key in

specific cut length. Make size-for-size copies up to 36 inches

wide by any manageable length at a speed of four D-size copies

per minute.